Flexible Rotary Drill Tool Drive Flex Shaft Attachment 42" Extension for Dremel

Description

Flexible Rotary Drill Tool Drive Flex Shaft Attachment 42″ Extension for Dremel*
FLEXIBLE and DURABLE Design – 42 inch Long Flexible Drive Shaft Can Run Up To 35,000 RPM at no load
COMFORTABLE GRIP SUITABLE for detail work, cutting, engraving,
carving, touch-up, drilling and finishing. GREAT for Jewelry Design,
Lapidary Work, Hobby, Crafting, Modeling, Repairs, Drilling and Shaping
Gemstones, Seashells, Sea Glass
QUICK – EASY – SECURE CONNECTION- Keyless Chuck and 1/8 inch Universal Collet
ALLEN WRENCH Included
100% SATISFACTION GUARANTEE – We also provide detailed instruction
with pictures. Dremel, Wen, Ryobi, Craftsman are registered trademarks
of their owners. This is a compatible product.
Instructions
1-
First, if is your rotary tool has a threaded
collars on the motor end, you will need to remove it by turning ccw
(counter clock wise). You will need the collar when you attach a tool
directly to the rotary tool. You will not need it with the flex shaft.
2-
Hold the flexible shaft by the silver color
fitting end (you will be able to see the inner shaft core). And pull the
inner core about 2 inches. If you need a pair of pliers to hold it,
that is normal.
MAKE SURE THE ROTARY TOOL IS UNPLUGGED FOR THE NEXT STEPS
3-
The flex shaft is there to transfer the rotation,
that is it. It is just like an extension. Push the core of the flex
shaft into the rotary tool collet and tighten the collet. You can use
the collet lock button to prevent it from turning while you are
tightening the nut.
4-
You can now screw the silver color fitting end of
the flex shaft onto the rotary tool housing. This is where you removed
the collar.
5-
The other end (BLACK COLOR) of the flex shaft is
where you will insert the desired attachment tool such as a diamond disc
or a burr. You will be using the silver chrome L shaped piece for this
stage. There is a hole on the side of the black side of the flex shaft.
And there is another hole under the black side. When you align these two
holes by turning the silver tip on the black end, insert the L shaped
metal. This step may sound confusing but it is simple. The inner metal
part on the black end of the shaft will want to turn as you try to
attach the tool. The L shaped metal is there to help you hold it while
you try to twist the tip.
6-
You can now attach the bit. And tighten the nut at the tip of the black end of the flex shaft.
*Dremel is a registered trademark of respected owners. This tool is not Dremel brand.